一、Overview：
The Company's production of electric heating film is a sandwich
structure of the translucent or transparent full-metal flexible
electric heating film, which, under the surface temperature is
good, excellent insulation properties made of insulation film, the
middle for a special Made of gold leaf resistance of the circuit.
Polyimide (Kapton) electrical heating film, is environmentally
friendly fire-retardant high-temperature polyimide film,
insulation, metal foil conductive metal wire as the internal body
heat, the high temperature and high pressure from a heat.
Electric heating temperature membrane can also be used with good
insulation properties superior insulation made of thin film for
insulation, such as PET, Teflon and silicone membrane.
Electric components of the main processing in two ways: First, by
corrosion into a variety of pattern and another is on carving
techniques.
Flake electric heating elements for the structure, filamentous than
electric components to provide more uniform heat market, the
heating time and faster response time, compared with the filament
electric components, low-power load, the longer service life.
Because this product is of thin, lightweight, high structural
strength, heat evenly, heat capacity of small, power density, high
temperature, environmental protection, fire-retardant properties.
Has been widely used in satellites, aerospace equipment and mobile
devices antifreeze, heating. At the same time, heating oil film
capability, corrosion-resistant chemical and radiation, can be
widely used in relatively harsh conditions of the occasion.
This product applied voltage: 1 V - 100V, in accordance with the
requirements of heating the workpiece, the products can be made of
various shapes, size and power of the different heating loop, for
example, can ask some of these loop heating and insulation with
some circuits as Heat, so the design can be very flexible.
二、Features：
1, the minimum of space; extremely light weight; thickness
extremely thin. The thick only 0.15-0.25 mm, according to the
workpiece can be the shape of arbitrary bending to ensure close
contact with the workpiece to ensure that the largest thermal
transfer;
2, extremely soft, easy bending, the minimum bend radius of only
about 0.8 mm.
3, the shape and size is extremely flexible, especially suitable
for the production of small electric flexible membrane components.
4, use of fever-like manner, allowing the surface load great power,
can achieve the greatest 10 W/cm2. Accordingly, the products have
uniform performance and heating, heating rate faster
characteristics.
5, in parts of different sizes to meet different requirements of
heating power and heating temperature requirements, users can be
designed to achieve the heating of the surface temperature
distribution.
6, thermal inertia of small, high-precision control of temperature,
warming up faster.
7, as a protective layer of insulation films with low saturation
vapor pressure, low-gas, and has excellent resistance to chemical
corrosion, antibacterial properties and anti-radiation performance.
8, can easily and temperature sensor integrated controller or as
one.
9, with the PSA adhesive products for quick installation (for 1
W/cm2), the film can also be heated by the user or by mechanical
pressure to the epoxy adhesive to install.
10, may need anywhere in the membrane surface design mounting
holes.
11, the range is safe, reliable, long life.
三、Mainly used in the following areas
1, scientific analysis equipment, such as: thermal conductivity
detector to provide constant temperature sources, medical equipment
and stable optoelectronic components such as temperature.
2, in the deep cold environment, so that the safety equipment
operating temperature. For example: satellites, space vehicles and
equipment used in high-latitude regions of the instruments, meters
of the anti-low temperature, such as card readers, LCD and other
liquid crystal display devices.
3, vacuum heating and baking areas.
4, military areas, such as missiles, warships, tanks, radar.
5, car mirrors defrost films, the radar antenna or snow removal,
defrosting and heating elements, such as speed-resistance.
6, health and beauty equipment industry.
