Use
RDC-G-performance silicon rubber Dianre Dai waterproof, and can be
used wet, places of explosive gas industry equipment or laboratory
pipelines, tank and tank pool heating, heating and insulation, can
be directly entangled in the heated parts of Surface, the
installation of a simple, safe and reliable. Can be used for air
conditioner compressors, motors, submersible pumps, and other
auxiliary heating equipment.
The major products are nickel-chromium alloy wire and insulation
materials, heating fast, high thermal efficiency, long service
life.
E-glass fiber core winding electric wire shelves, as the main
silicon rubber insulation, heat resistance of good, reliable
insulation properties.
Products with excellent flexibility, can be directly entangled in
the heating device, good contacts, heating uniform.
Model meaning
Specifications and technical data
| Voltage V | Power W | Length m | Width mm | Lead form |
RDC-G-220V/75 | 220V | 75 | 1.0 | 26 | Single-ended |
RDC-G-220V/200 | 200 | 2.5 | Single-ended |
RDC-G-220V/300 | 300 | 4.0 | Single-ended |
RDC-G-220V/750 | 750 | 10 | Single-ended |
The maximum temperature heat-resistant insulation material: 250
Recommended temperature: <200
Insulation resistance:> 50 M
Dielectric strength: ~ 1500 V1min
Power error10%
Use
RDC-G-type silicon rubber Dianre Dai is a particularly soft, and
the length of the tropics, its design high-power density,
therefore, in addition to general with the constant power with
thermal insulation, in some cases can also be used for the heating
needs Places.
Attention should be paid to use：
(1) installation, the silicone rubber Dianre Dai flat side should
keep abreast of media channels, the surface of the tank and
aluminium tape fixed.
(2) in order to reduce heat loss should be measured and, in Dianre
Dai-insulation layer.
(3) no overlap winding installed to prevent overheating damage.
Another may be based on user requirements (specifications,
dimensions) to custom-like, high-pressure-resistant with other
dielectric strength ~ 20000 V / min
